Surveying the tile route

Same procedure as Ditching:

1. From the Tiling wizard, tap New Survey.
2. Drive to the planned outlet. Tap Start in the sidebar.
3. Drive the tile centerline.
4. Tap Stop at the far end. Save.

Tips for tile surveys:

• Drive the actual centerline. The tile design follows your GPS path.
• Steady pace. Default Survey Interval (10 ft / ~3 m) is fine; drop to 0.5–1 m for short detailed lines.
• Stay on RTK Fixed.
• The survey does NOT have to start at the outlet — outlet detection happens in the design dialog. Drive whichever direction is easier.

Loading a saved survey

Tap Load Survey in the wizard. Pick a survey from the list. The Tiling design dialog opens with that survey's terrain. (To reopen a finished design instead, use Load Design.)