DEBUG
Settings Reference chapter of the Ditch Assist app manual. The same text is in the app under Manual.
In the app Manual › Settings Reference › DEBUG
Settings here are for development and field service. Don't change unless directed.
Send Commands — when off, the app calculates blade targets but does NOT send commands to the controller. Useful for office testing. Default ON. (Excavator mode disables sending regardless of this setting.) Not shown in Ditch Assist Lite, which never sends commands.
GPS Delay Timeout — how long without a GPS update should the app declare GPS stale. Default 5.0 s.
GPS Stale — a read-only status indicator, not a button. It shows a green check with GPS data is fresh, or a red warning icon with GPS data is STALE (auto-hold active). There is no manual trigger.
Did this answer your question?
Thanks. That tells us which pages to improve.
Still stuck? Talk to a product specialist. 1-833-DITCH-AS · support@ditchassist.com · Monday to Friday, 8 a.m.–5 p.m. Central.
Calling about a problem? Send your app logs first so support can see what happened.